Tag: Validation

  • 10 Lessons from industry responses to the ESMA Guidelines Consultation

    While not an exhaustive list, here are our key takeaways from reading the ESMA SFTR Guidelines consultation responses. The overall level of engagement in relation to the consultation was substantial, with 49 files published by ESMA following the consultation period.

    1. Reporting certainty

    A few fundamental questions are key to providing clarity to support a timely build for SFTR reporting. Banks and credit institutions (due to report from April 2020) need answers to some of the these questions well in advance of the self-imposed Q4 2019 deadline set by ESMA.

    In particular, question 25, whether to provide full reports or the delta of changes for modifications and corrections – respondents overwhelming voted for full reporting.

    2. Reportability of intraday market infrastructures executed SFTs

    Which intraday transactions executed on behalf of firms by CSDs and CCPs remain in-scope for reporting? While T2S Auto-collateralisation transactions are explicitly excluded from reporting, does this also cover UK Crest Auto-collateralised repos? Extracting and reporting this data presents unique challenges.

    3. Scope and third country considerations

    The approach to determining the ‘conclusion’ of a transaction by a branch is far reaching and strays from the EMIR definition. It appears to focus on the activities of individuals rather than risk held in the EU. The practical challenges of reporting SFT activities of non-EU entities where traders are supervised by EU branches are immense and likely to lead to significant confusion in relation to areas such as bilateral margining and reuse.

    Concerns were raised where SFTR does not require non-EU AIFs managed by EU AIFMs to be reported (unlike EMIR), while EU AIFs must be reported regardless of whether the AIFM is based in the EU (again unlike EMIR).

    4. Why are buy-sell backs still treated differently?

    ESMA have specified that documented buy-sell backs should be reported as buy-sell backs listing the master agreement, but it is still unclear why the reporting requirements differ from repo. The inability to apply a repo rate, forward breakeven yield or forward price on a buy-sell back is a particular issue.

    5. Is fails reporting really required?

    There has been some confusion about the reporting of settlement fails (general consensus was that perfect settlement would be assumed unless both parties chose to modify a transaction to reflect a default or extended fail).

    6. How to report bilateral variation margining

    Concerns continue to surround the reporting of bilateral variation margins for repo. Given these margin calls at the counterparty portfolio level are entirely separate from the trade level collateral, there should be a separate end of day collateral update report to reflect bilateral margining. They cannot, as ESMA examples suggest, be incorporated with trade level collateral updates.

    7. Failure to transmit Unique Trade Identifiers (UTI)

    The issue of what to do if a counterparty is responsible for providing the UTI fails to provide it in a timely manner for reporting, remains an open question. The real question is how the party subject to late notification of the UTI by their counterparty can be excused from their obligation to submit timely reports.

    8. Availability & consistency of reportable data

    There are many concerns about the availability of data for reporting. The FSB themselves highlighted in their May 2019 document Thematic Review on Implementation of the Legal Entity Identifier that on aggregate only 55% of all financial instruments in scope have an LEI code (representing 78% of outstanding amounts) and that only 11% of all firms that are issuing securities have so far obtained an LEI. Mandating usage of issuer LEIs when firms that use securities as collateral have no contractual relationship with the issuer of the securities, appears a step too far. Solutions are to make the field conditional or apply a standard dummy issuer LEI.

    Other concerns persist around missing official CFI codes, ISIN codes, differences in credit rating assessments between firms and the collateral type field.

    9. The removal of ESCB transactions from the calculation

    Trade associations reiterated that removing ESCB transactions from both sides of estimated re-use calculations will be both difficult and misleading. Nonetheless, this is understood to be an FSB requirement rather than ESMA specific.

    10. Uncertainly around in-scope commodities financing transactions

    A number of trade associations and other respondents commented on the significant uncertainty felt by the commodities trading industry around the SFTR reporting scope of any of their transactions. Concerns were raised that while commodities financing transactions share attributes with SFTs, they are not executed for financing purposes. Disagreement exists as to which transactions constitute repos and which buy-sell backs, in general they were deemed hard to define under existing SFT definitions. There are also concerns that certain commodity transactions, believed to best fit the repo definition use pledge arrangements and not title transfer. Some power and gas contracts may also be reportable under SFTR as well as REMIT. While exclusions are in place for EMIR, they are not in place for REMIT.

    Did you know Jonathan provides CPD-accredited, CISI-endorsed training on the SFTR reporting requirements? Book your place on one of our upcoming courses here or get in touch for bespoke, in-house training.   

  • Sunny ESMA provides some SFTR relief

    Sunny ESMA provides some SFTR relief

    ESMA published a Consultation paper “Guidelines for reporting under Articles 4 and 12 SFTR,” together with the latest consolidated SFTR validation rules. The deadline for responses is 29 July 2019. ESMA plan to consider feedback during Q3 2019 and the final report is scheduled to be published in Q4 2019. This does not give a lot of time, particularly for the 1st phase of reporting counterparties (Banks), due to go-live in April 2020.

    Nevertheless, ESMA provided clarity on many issues and gave reason to be cheerful as many SFTs executed on behalf of financial institutions through powers of attorney during the course of daily clearing, custody and settlement activities at CCPs, CSDs and ICSDs were ruled out of scope. This has undoubtedly removed a major operational headache from the SFTR reporting requirements and will assist regulatory authorities in gaining a better understanding of the data (as they will be significantly less overwhelmed with noise).

    • In particular, Chapter 5 (General Principles), paragraphs 25-27 rule out any reporting of short term credit lines for custody or CCP clearing.
    • Paragraphs 36-41 rule out reporting of any transactions relating to “fails-curing” services offered by CSDs.
    • Paragraph 43 rules out the need to report any transactions associated with Target 2 Securities Auto-Collateralisation.

    The guidelines also clarify the exclusion of the need to report under SFTR in relation to: Retail client lending (except when it is against an irrevocable trust), private banking & Lombard loans, syndicated lending and other corporate lending for commercial purposes, intermediate give-ups and take-ups (in the execution & clearing chain) and transactions involving emission allowances.

    In further points of clarification:

    • Buy-sellbacks and Sell-buybacks should be reported as such with the appropriate master agreement detail where applicable (overruling the original SFTR regulation) (paragraph 61).
    • Margin Loan reporting only applies to Prime Brokerage business (paragraph 11).
    • Modifications that are agreed but have not taken place should not be reported until the actual modification takes place (paragraph 117).
    • Margin loans – where the value of an existing margin loan hits zero, the transaction should be modified (MODI action type) rather than terminated (ETRM action type) (paragraph 83).
    • Securities lending and borrowing transactions can only involve a single ISIN being transferred between a given pair of counterparties (paragraph 65).
    • Backloading: ESMA advises that they like the idea of reporting all open and term transactions executed prior to the date of application whether they meet the requirements for backloading or not. This approach is seen as operationally simpler for many reporting parties and provides authorities with greater information in relation to variation margining (paragraphs 167-170).
    • When trading with sub-funds, each sub-fund should be treated as a counterparty if they have their own LEI (paragraph 52)
    • For cleared SFTs, each SFT between the CCP, its clearing members and the clients of those clearing members should be treated as separate SFTs with different UTIs (paragraph 53).
    • In relation to Repos, collateralised loans in more than one currency constitute separate SFTs. This doesn’t preclude a single SFT having collateral denominated in multiple currencies though
    • Small & medium sized non-financial counterparties trading with a non EU third country entity must either trade with an entity that has been granted equivalence (in which case there is no reporting obligation under SFTR), else they will need to delegate or self-report the transaction/s (paragraph 93).
    • Execution by a branch was clarified to cover the following: a) for a client in accordance with a discretionary mandate given to it by the client; b) where the branch has supervisory responsibility for the person responsible for the investment decision concerned; c) where the branch has supervisory responsibility for the person responsible for execution of the transaction; d) where the transaction was executed on a trading venue or an organised trading platform located outside the Union using the branch’s membership of that trading venue or an organised trading platform (paragraph 102).
    • Counterparties should not report the LEI of the CSD in which they are either a direct or indirect participant (paragraph 122) in the CSD participant field.
    • ESMA acknowledged that updating valuations of securities on loan or used as collateral may not be possible where pricing becomes stale. This can affect suspended shares and some illiquid fixed income securities. In these instances, reporting parties should use contractually agreed values and only update them if new price information becomes available (paragraph 155).
    • ESMA advises counterparties should always use official sources for CFI codes. Those who felt that it would be sufficient to just populate the first 2 characters are likely to be disappointed as ESMA states that X should only be used when a character is not applicable (paragraph 163).
    • Non-bank entities are permitted to start reporting earlier than their date of application if they find it easier (paragraph 188).   

    The consultation also contains an extensive set of sample reports for many different scenarios, detailing how each of the 4 reporting tables should be populated. Once we’ve had the opportunity to review these samples and the latest trade repository validation rules, we will produce a follow-up blog.

  • CFTC hints it will follow in ESMA’s footsteps

    CFTC hints it will follow in ESMA’s footsteps

    In the world of derivatives reporting the Dodd-Frank Act (DFA) may be the older cousin of EMIR but if we think about which regime is more mature, EMIR takes the cake. Since the reporting go-live in 2014, EMIR has grown through several different amendments to arrive at where we stand today. Its strict validation requirements aim to provide the data quality that is necessary to measure systemic risk. The CFTC on the other side of the Atlantic has remained relatively quiet since reporting go-live at the end of 2012. That is, until now…

    More complete and accurate data

    The CFTC has published a White Paper which gives a view of which direction the US regulation is heading towards. No awards for guessing that they want ‘more complete, more accurate, and higher quality data’. How can this be achieved? The CFTC is proposing to elaborate on requirements of part 49 to ensure that counterparties and repositories are continuously assessing the integrity of their data and insisting that any inaccurate or missing data is corrected. This can only be achieved if the requirements are clear. In the paper, CFTC admits that part 45 data fields are not well defined and this has led to inconsistent reports which cannot be relied upon for any meaningful analysis.

    The proposal is to take on board the CPMI-IOSCO harmonisation of data elements that were published in April. Amongst others, the report details that LEIs should be mandated to identify counterparties and MICs should be used to identify trading platforms. Sounds quite familiar, doesn’t it? As well as this there is an indication that collateral margin fields will be put in scope for reporting as is the case in EMIR and ASIC jurisdictions.

    Relax of timeliness requirements 

    Further harmonisation is suggested by the timeliness requirements being relaxed to a T+1 model. The philosophy is that if Rome wasn’t built in a day, it won’t collapse in a day either. If firms take the time to agree and confirm the terms of an OTC contract before reporting it, then the data received will be of a higher quality.

    Swaps Regulation Version 2.0 won’t be a complete copy and paste of EMIR though. There is no suggestion that the regime will move to dual-sided reporting and the real-time requirements of part 43, although maybe changing as well in terms of notional capsizes, will remain a unique aspect of Dodd-Frank reporting.

    No exact details or timescales are available yet however we’re pleased to remind our clients that our ReportShield™ accuracy testing service already checks the correctness of these fields under Dodd-Frank, so you can be reassured that you’re already one step ahead of the regulator. Alternatively, if you’d like some assurance that your DFA reporting is accurate, timely and complete, please don’t hesitate to contact us.

  • ESMA updates EMIR Reporting Q&As for backloading requirement

    ESMA updates EMIR Reporting Q&As for backloading requirement

    ESMA published its latest EMIR Q&As earlier this week to bring it in line with the revised technical standards which come into effect on 1 November this year.  This guidance is supported by the publication of revised validations to be applied by the trade repositories (the so-called L3 validations). Kaizen’s validation service will be available for clients to test their compliance with the validations from 1 May.  We will deal with EMIR RTS re-write in a forthcoming blog that will explore the impact of the EMIR changes. 

    The updated Q&A also deals with the requirements for back-loading of historic trades which is what we address in this article.   

    Back-loading of EMIR reports

    The back-loading obligation applies to firms with trades that were open or entered into after 12 August 2012 (the date from which EMIR took effect) and the commencement of EMIR reporting on 12 February 2014.  This requirement also affects firms that became subject to EMIR after the reporting obligation came into effect due to a relocation or re-categorisation of their business.  Any trades subject to the back-loading requirement must be submitted before the end of 12 February 2019. 

    The back-loading trades can be submitted in their end state and for exchange traded derivatives the concluding position for those cleared contracts.  Where these trades or positions are concluded or terminated after 11 August 2014 (the date when collateral and valuation reporting came into effect), the valuation and collateral fields must also be populated.  

    Reporting firms have been concerned about how to manage the exchange of the Trade ID (UTI) for historic trades.  Such a process would be extremely difficult however ESMA has clarified that where a trade is no longer live at the point of back-loading, the Trade ID or UTI will not have to be exchanged with the counterparty to the trade.

    ESMA has also made clear that following a corporate restructuring, the LEI of the corporate entity that is assuming the obligations for the demised entity’s derivative contracts, must be reported.  If the contracts are not being transferred, the contracts with the liquidated entity would be effectively terminated and should be reported as such.  This makes sense as it will ensure that the risk associated with those contracts is reflected against the entity that holds the risk. 

    A good outcome for firms?

    This is likely the best outcome that could be reached between ESMA and firms in that it allows the EMIR reporting requirement to be met without placing undue burden on reporting firms.  Still, it comes at a time when firms are more than busy with preparations for MiFID II with SFTR closely on its heels.  These changes won’t be the last either, with ongoing guidance via the Q&A process expected for MiFID II reporting both before and after 3 Jan 2018. 

    Dealing with constant change to reporting

    It is clear that firms need to develop speedy and effective processes to implement reporting changes but more than that –  the costs need to be brought under control.  Whilst your reporting solution will be the first area that needs to be addressed, the burden of testing any changes is not insignificant in terms of time, resources and overall cost.  Our testing approach provides early access to validation testing for our clients with full accuracy and completeness testing applied once the reporting solution is completed ahead of go-live.  This testing approach can be used to augment or replace your internal user acceptance testing.  It saves on costs and provides full visibility of your reporting quality, allowing corrections to code or static data to be made before revised reporting requirements take effect.

  • Why data quality is key to regulatory reporting compliance

    Why data quality is key to regulatory reporting compliance

    The FCA has used its latest MarketWatch newsletter to remind firms of their transaction reporting obligations, the persistent poor quality of their reporting, and that the FCA have mechanisms in place to detect errors which may result in stringent actions such as fines.

    While this message isn’t new, the FCA has also published a table showing approximately 650,000 data quality breaches across the industry over a one-week period where the FCA’s Transaction Monitoring Unit (TMU) tested only four of the transaction reportable fields. It will be a disappointment to the FCA that in each instance the errors are ones previously made by firms sanctioned for incorrect transaction reporting as well as errors highlighted in previous Market Watch newsletters. These include things such as late reporting of transactions, incorrect MIC codes, wrong execution times, wrong quantity or missing unit price.

    Just the tip of the iceberg

    The one-week snapshot by the FCA does not reveal the true size of the problem.  We took a closer look and analysed in detail the findings of the publicly available fines issued to firms for incorrect transaction reporting since 2009.  Our findings are displayed in the graphic above.

    1. Tip of the iceberg: Maybe not the perfect analogy, but for those firms fined and where information is publicly available, we found only 35% of the firm’s reportable transactions were reported accurately and completely. That is to say, passed ARM validation and the data was correct.
    2. Base of the iceberg: That leaves 65% of the firms’ reportable transactions being reported incorrectly or not at all. In all cases, firms did not have appropriate controls in place to identify and test the correctness of their reports. In short, they were unaware that the majority of their reports were incorrect.

    Only 7% of the transactions were not attempted to be reported or were duplicates.  All of the remainder were breaches where the report passed validation but the data was incorrect. In other words, they were ‘valid but wrong’.

    Transaction reports must be tested at source

    What this tells us is that firms need testing at source not just ARM validation. Even after eight years of MiFID transaction reporting, numerous warnings and increasing fines from the FCA, significant numbers of transactions are being reported incorrectly with firms unaware of their inaccuracies. In addition, firms are deriving false confidence from passing the validations provided by ARMs and the FCA.

    Importance of getting reporting right

    In Market Watch 50, the FCA TMU makes it clear that they see failure to produce current MiFID reports of good quality as an indication on how well a firm can meet its future and more complex obligations under MiFID II/R and in part, compliance with the recently introduced Senior Managers Regime.

    It says: “The ability of firms to submit accurate and complete transaction reports is essential if they are to be in a strong position to meet the more complex requirements of MiFIDII/R.” It also reminds firms: “If we continue to find firms that fail to identify or mitigate risks associated with market abuse then we will take stringent action against those firms. These actions could include penalties such as fines.”

    This echoes the warnings raised by the FCA in all of the public fines for transaction reporting. The obligation to make complete and accurate reporting is also unambiguously clear through the FCA Handbook (SUP 17) and the Transaction Reporting User Pack (TRUP 3.1).

    Detecting market abuse

    In Market Watch 50, the FCA also reminds the industry of how important a tool transaction reporting is to allow them to detect market abuse.  Poor quality data directly affects the ability of the FCA, European competent authorities and other regulatory bodies such as the Bank of England to detect market abuse or carry out their supervisory responsibilities.

    Where to from here?

    The picture illustrated by the fines for transaction reporting is one where a large majority of reported transactions have passed high levels of validation but the data is still inaccurate. Failure by firms to report correctly is a major industry problem. Firms need to change their approach to protect themselves under the current MiFID regime and the upcoming MiFID II/R in 2018.


    Kaizen’s ReportShield™ accuracy testing checks transaction reporting data at source and identifies transactions successfully submitted to ARMs and the FCA but still wrong.  An independent, managed service, ReportShield is already being used by a number of firms to provide reporting assurance and deliver confidence to management and the regulator. The service significantly reduces risk to firms, offers protection to managers who have SMR responsibilities, and is delivered at a significantly lower cost than testing in-house.

  • ESMA Data Portal Changes

    ESMA Data Portal Changes

    Firms subject to MiFID and other regulatory reporting obligations should be aware that ESMA is migrating its current data register to a new portal.

    These changes will be of particular interest and relevance to compliance and operations teams.

    The existing portal will be removed from 1 April.  The migration impacts the following published data sets which will have a direct impact on validation to ensure compliance with regulatory reporting:

    • Published list of shares admitted to trading on regulated markets
    • List of exempted shares
    • Register of systematic internalisers
    • List of authorised regulated markets
    • List of authorised multilateral trading facilities (MTFs)
    • Central counterparties

    To enable a smooth transition, ESMA is making the data register available on both portals for the rest of February and until the end of March.  As of 1 April 2016 the old portal will be shut down and not accessible.

    Firms that have established automated access to these lists should refer to the updated web service procedure ESMA has published.

    Developers responsible for the automated processes adopted in respect of the datasets should review the information detailed on ESMA’s website.

  • EMIR level 2 validations – are you ready?

    EMIR level 2 validations – are you ready?

    At the end of October ESMA is introducing new validations to be applied by Trade Repositories (TRs) which I think will be a good thing for reporting quality.  In this article I provide some context to the changes, but contend that validation on its own is not enough to deliver quality reporting.  Validations cannot identify records that are valid but wrong.  For that we need a much smarter approach.

    ESMA and national competent authorities have expressed concerns around the quality of reporting today and they expect firms to address this.  But to promote quality ESMA has taken its first step towards improvement with the introduction of additional validations.

    Some background

    ESMA originally required the TRs to apply very limited validations to EMIR reports. The idea was that the TRs would not reject records because of problems in data quality and submissions would not be delayed by problems with one or more data fields within the report.  Therefore ESMA and other regulators would have access to the data that was available irrespective of quality.

    This approach makes more sense the more data that is submitted with each record.  The reason is that with strict validation, a single error in one field would prevent the remaining data from being received by the TR.  However, this approach requires the reporting entity to have a strong control framework in place to ensure that errors are self-identified and rectified.

    The limited validation approach initially adopted by ESMA differs markedly from that taken for Transaction Reporting.  On launch of the Approved Reporting Mechanisms (ARMs) regime in November 2007 a detailed set of strict validations was specified by the FSA (now the FCA) to be in place before an ARM would receive authorisation. These validations are applied by the ARMs to all records submitted by reporting firms and if the record failed a validation it would be rejected by the ARM and the firm notified.  I am calling this approach strict validation.  Many firms apply their own validations prior to submitting their records to an ARM and the FCA also applies strict validation at the point of receipt creating multiple layers of strict validation the vast majority of which is duplicative.  So we see very low industry rejection rates for reports sent by ARMs to the FCA.

    Benefits of strict validation

    The primary benefit of strict validation is that the submitting firm keeps ‘holding the baby’, i.e. they know when their submission has failed and will be in breach of the timeliness obligations.  They are in effect forced to act to remedy the problem.  The reporting entity does not need to have a good control framework in place to know that they have a problem that needs fixing.

    ESMA has now undertaken a volte face and now requires the TRs to apply strict validations.  Nearly every field is subject to some sort of validation requirement per the L2 validations.

    The change in validation approach clearly introduces new challenges and costs for firms as well as the TRs.  These validations would have been better implemented before EMIR go-live, but it has taken the experience of poor quality data to crystalise this decision.

    So what should firms be doing to prepare?

    There is the immediate problem of ensuring that you will be able to continue to report post October.  That means assessing the impact of the new validations on existing positions and correcting in advance any errors that would result in updates to those positions being rejected.  Similarly, firms should consider whether their process for dealing with rejections can handle an increase in volumes particularly in the early period.

    More than that, firms should be looking at how to identify records that are valid but wrong.  This requires testing of the EMIR reports at the Trade Repository and reviewing the adequacy of their control framework over EMIR reporting more generally.  Errors can be introduced into the reporting process or are a result of an incorrect interpretation of the reporting requirements so care must be taken to ensure that the testing that is conducted doesn’t build in the same interpretation errors.

    More can be said on testing but I will leave that for another post. If you have any views on the above I would be keen to hear them.